Posts Tagged Wireless

Wi-Fi Gadgeteer Robot controlled by Windows Phone with image streaming

Posted by Marco Minerva I have updagred the .NET Gadgeteer Robot I described in the post Constructing a Bluetooth controlled Robot, replacing the Bluetooth Module with Wi-Fi and adding a camera to stream images. The result is a Robot that can be controlled by a Windows Phone application, with which it is also possible to show […]

, , , ,

14 Comments

Connessioni XBee con device .NET Gadgeteer (Italiano)

By Mike Dodaro, translated by Marco Minerva from the original English version Le schede XBee hanno un costo estramamente contenuto e possono essere integrate in qualsiasi tipo di device. Il loro raggio di funzionamento supera quello delle connessioni Bluetooth. L’articolo Zigbee Networking with XBee Series 2 and Seeed’s Products fornisce una rapida introduzione alle funzionalità di XBee. Il libro di Robert Faludi intitolato Building Wireless […]

, , , , , , , , , , , ,

Leave a comment

Constructing a Bluetooth controlled Robot

Posted by Marco Minerva In this post, I’ll show how to construct a robot with .NET Gadgeteer and how to control it using a Bluetooth connection from a PC application based on the 32feet.NET library. Let’s start from .NET Gadgeteer part. The base of our robot is the Rover 5 Tank Chassis, that provides two […]

, , , ,

9 Comments

XBee Radios in .NET Gadgeteer Devices

XBee radios are inexpensive and they can be embedded in all kinds of devices.  XBees can be networked so that a failure of one radio does not impar communication between and among others in the network.  Their range exceeds that of Bluetooth connections.  The article Zigbee Networking with XBee Series 2 and Seeed’s Products provides a quick overview of XBee […]

, , , , , , , , , , , ,

15 Comments

Controlling a Gadgeteer device using Bluetooth Module and 32feet.NET library

Posted by Marco Minerva In this post, I’ll show how to send messages to a GHI Bluetooth module from a PC application using the 32feet .NET library. First of all, let’s create the Gadgeteer application. Connect an USB ClientDP and an OLED Display to a FEZ Spider Mainboard, as in the following screenshot. .NET Gadgeteer […]

, ,

22 Comments